Mugello-KH I
User Guide
Rigging Procedures
Suspended Array
Key rigging components must be inspected before
each use.
Any rigging components found to be defective,
or even suspect might be defective should be
replaced with equivalent approved part.
Always use properly rated rigging hardware.
K-array is not responsible for any rigging equipment
and accessories that are not manufactured by
K-array.
K-array loudspeaker and hardware are intended for
suspension from approved rigging points only.
Ensure that the total weight of the loudspeakers
and additional hardware assembly in use is
lower than the Working Load Limit (WLL) of the
suspension points.
Rigging and flying loudspeaker systems shall be
accomplished by knowledgeable and experienced
professionals.
It is the user's responsibility to ensure that the use
and suspension of heavy loudspeaker systems
conform to all applicable laws and regulations in
force at the time and location.
16
Needed Equipment
Name
Description
Bumper for KH2 I-KS3 I
K-HCFLY2 I
- BLACK
Bumper for KH2 I-KS3 I
K-HCFLY2W I
- WHITE
Bumper for
K-HCFLY35 I
KH5 I-KH3 I-KS4 I - BLACK
Bumper for
K-HCFLY35W I
KH5 I-KH3 I-KS4 I - WHITE
Fly bar for KH2 I
K-HCFLYST2
step array
Fly bar for KH5 I-KH3 I
K-HCFLYST
step array
Step array hardware for
K-STEPM2 I
KH2 I (kit for 1 unit)
Step array hardware for
K-STEPM3 I
KH3 I (kit for 1 unit)
Step array hardware for
K-STEPM5 I
KH5 I (kit for 1 unit)
Adapter to join KH2 I
K-HCLINK2/35
to a KH3 I or a KH5 I (or
cluster)
Image
Apply to
KH2 I / KH2P I
KS3 I / KS3P I
KH2 I / KH2P I
KS3 I / KS3P I
KH5 I / KH5P I
KH3 I / KH3P I
KS4 I / KS4P I
KH5 I / KH5P I
KH3 I / KH3P I
KS4 I / KS4P I
KH2 I / KH2P I
KH5 I / KH5P I
KH3 I / KH3P I
KH2 I / KH2P I
KH3 I / KH3P I
KH5 I / KH5P I
KH5 I / KH5P I
KH3 I / KH3P I
KH2 I / KH2P I