Suspended Stand Alone Subwoofer
The subwoofers Thunder-KS3 I/KS3P I and Thunder-KS4 I/KS4P I
can be suspended as stand alone unit.
Screw at least four M8 eye bolts (two per side) at the sides of
the unit and hang it to the rigging point.
1
Remove the side bolts
Subwoofer Array
The subwoofers Thunder-KS3 I/KS3P I and Thunder-KS4 I/KS4P I
can be stacked on top of a line array of Mugello-KH loudspeakers
or used as basements for ground stacked array of Mugello-KH
units.
Needed Equipment
Name
Description
Rigging frame KS3 I /
K-EXTFRAME3
KS3P I - BLACK
Rigging frame KS3 I /
K-EXTFRAME3W
KS3P I - WHITE
Rigging frame KS4 I /
K-EXTFRAME4
KS4P I - BLACK
Rigging frame KS4 I /
K-EXTFRAME4W
KS4P I - WHITE
2
Screw M8 eye bolts
Image
Apply to
KS3 I / KS3P I
KS3 I / KS3P I
KS4 I / KS4P I
KS4 I / KS4P I
Thunder/Mugello Mecanical Compatibility
Subwoofer
Thunder-KS3 I
Thunder-KS3P I
Thunder-KS4 I
Mugello-KH3 I
Thunder-KS4P I
Mugello-KH3P I
Rigging Procedure: Suspended Subwoofer Array
1. Remove the eight M8 side bolts at the subwoofer sides.
2. Install the rigging frame at the subwoofer sides.
3. Attach the bumper to the rigging hardware at the
suspension point.
4. Attach the Thunder-KS subwoofer to the bumper.
Use four quick-release pins to secure the bumper to the
subwoofer.
The Thunder-KS subwoofers shall be set
on top of the Mugello-KH array elements
in suspended line array systems
Mugello-KH I
User Guide
Array Element
Mugello-KH2 I
Mugello-KH2P I
Mugello-KH5 I
Mugello-KH5P I
19