Chapter 1 Characteristics And Specification; Printing Specification; Printing Paper; Printing Font - SPRT SP-POS5810 User Manual

Chapter 1 Characteristics and Specification

1.1 Printing specification

● Printing method: direct thermal
● Printing paper width: 57.5±0.5mm
● Printing density: 8 dots/mm, 384 dots/line
● Printing speed: approx. 60mm/s (valid content per line isn't over 25%)
● Reliability:
Printing head life span:50km
Operating Conditions:
＊ Print 12 × 24 ASCII characters, 50 lines every time, intermittent and repeated
＊ Each dot-line printing at the same time should not exceed 25%, for each
character-line's one dot, vertical and repeated printing can not exceed 11 times
＊ Use specified thermal paper
● Effective printing width: 48mm

1.2 Printing Paper

● Paper Type: General Thermal Paper 57.5xΦ60 mm（MAX）
● Paper Thickness －－－0.06-0.08mm
● Paper Installation: Drop-in Easy Loading
● Paper Cutting Method: Manual

1.3 Printing Font

● ANK Character set:
12×24 dots, 1.5（W）× 3.00（H）mm;
● GB2312-80(Chinese):
24×24 dots, 3.00（W）× 3.00（H）mm.

1.4 Interface

● USB interface:
1