Miltenyi Biotec CliniMACS Formulation Unit User Manual page 24

22
The CliniMACS Formulation Unit including accessories complies to the EMC
standard IEC60601-1-2. For details refer to the appendix of this user manual. It is
a Protection Class I instrument and must be connected to the CliniMACS Prodigy
which must be plugged into a grounded power outlet.
Conditions of operation: Supply voltage fluctuations up to ±10% of the nominal
voltage. Transient over-voltages present on the mains supply: Category II. The
instrument is suitable for rated pollution degree 2.
The instrument has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. Note: The emissions
characteristics of this instrument make it suitable for use in industrial areas and
hospitals (CISPR 11 class A). If it is used in a residential environment (for which
CISPR 11 class B is normally required) this instrument might not offer adequate
protection to radio-frequency communication services. The user might need to
take mitigation measures, such as relocating or reorienting the instrument. If
this instrument does cause harmful interference to radio or television reception,
which can be determined by turning the instrument off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna,
• Increase the distance between the instrument and the receiver,
• Connect the instrument to an outlet on a circuit different from that to which
the receiver is connected,
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications of the instrument, unless expressly approved by
Miltenyi Biotec, may void the authority to operate the instrument pursuant to
FCC 47 CFR.