Phonebook Operations - EnGenius FreeStyl SIP User Manual

1.
While on the call, press the , the first call will be on hold. Then
you can hear a dial tone from PBX.
You can enter the PBX extension number you want to transfer the
2.
caller party.
3.
When the transfer party answers the call, you can press the
to transfer it to the first caller.
Call Conference
To initial a conference, you can have 3-way conference call.
1.
2.
While on the call, press the , the first call will be on hold. Then
you can hear a dial tone from PBX.
You can enter the 2 nd phone number you want to add the caller party
3.
to join the call.
4.
When the 2 nd party answers the call, you can press the
conference with two parties.

Phonebook Operations

1. You can store up to 50-entries in the phone book. Each
entry can contain a phone number or handset ID (up to 26-
digits) and a name (up to 16-characters).
2. To access the phone book, press
followed by 2 or press scrolling key while the
handset is in standby mode.
3. To add a new entry:
a. Press ADD (Left) soft key.
b. Enter the name when LCD prompts "Name?" Use
DELETE (Right) soft key to delete the last digit entered.
When completed, press SAVE
Re: Up to 16-characters can be entered as the name.
key
to have a
MENU (Right) soft key,
(Left) soft key to save.
~43~
c. You will then be prompted to enter a number for the
name just entered.
Re: Up to 26-digits can be entered as the number.
d. After entering the number, press the
key to save this entry into phone book.
e. Enter a phone book entry without a name; all records
without a name will be placed on the top of the phone
book list.
f. To enter the name, press the corresponding keypad
number one or more times according to the order of
the character on the key.
See table below for a list of available characters and
their orders. For example, press
character "A," twice for "B," etc.
Notes:
1.
When entering a phone number, the cursor automatically advances to the
next digit field. Use or
backward or forward to insert or delete (the digit above the cursor or left
of the cursor if the cursor is on the right of the last digit).
2. When entering a name, the cursor automatically advances to the next
character field if you press a different key for the next character. If you
need to enter consecutive characters from the same key, you can wait for
the cursor to advance or use
cursor backward or forward manually. Also use
cursor to insert (to the left of the cursor) or delete (the character above
the cursor or left of the cursor if cursor is on the right of the last character).
3.
By default, all letters are entered in upper case. Use
between upper and lower cases.
4. A "Pause" entry represents a 1-second delay in dialing the following digits,
which is useful when calling a sequence of segmented numbers (e.g.,
access codes, credit card numbers, auto-attendant entries, etc.) Pause is
entered by pressing the ＃ key twice (LCD displays P). Entering pause
twice (PP) will result in 2-seconds pause in the dialing.
SAVE (Left) soft
2 once for the
scrolling key to move the cursor
or scrolling key to move the
or to move the
the key
to toggle
＊
~44~