Placing A Call On Hold; Mute; Do Not Disturb (Silent Ring); Key Guard - EnGenius FreeStyl SIP User Manual

Placing a Call On Hold

1. When a call is in progress, it can be put on hold by pressing
OPTION (Right ) soft key and the
＊
2. To return to the conversation, press
key.
Notes:
1. Handset LCD displays when a call is on hold. An alert tone (a beep)
every 30-seconds will remind the handset that a call is on hold.
2. If the operation (e.g., call transfer) fails after putting a call on-hold,
the held call may be dropped.

Mute

1. After a link is established, you can press
key to mute the handset microphone.
2. When mute is active, the other end will not hear your
voice, but can still speak to you.
3. To leave the mute state, press UNMUTE
for the current call.

Do Not Disturb (Silent Ring)

1. Enter the key sequence MENU-3-1, then select "Off." Press
SELECT (Left) soft key to confirm your choice. This will turn
off the ringer until it is turned on again from the menu.
2. For temporary silencing the ringer when an incoming call
arrives, press SILENT (Left) soft key.

Key Guard

key.
UNHOLD (Left) soft
MUTE (Left) soft
(Left) soft key. Mute is effective only
~37~
1. To prevent accidental dialing, you can press
soft key, then press "1" to select Key Guard option. The
handset keypad is now locked. No key entry is accepted.
2. To unlock the keypad, press UNLOCK
within 2-seconds, press the digit
3. Once returning back to standby mode for 15-seconds, the
Key Guard will be automatically enabled.
4. Key Guard is in effect until unlocked.

Battery Recharge and Replacement

1. Charge the battery when one or several of the following happen:
a. Phone beeps twice (every 60-seconds in talk mode, every 10-minutes in
standby mode).
b. Battery icon is empty.
c.
Phone does not respond when a power On/Off key
d. LCD and backlighting become dim.
e. Talk range shortfall is experienced.
2. You can replace the handset battery after placing the call-in-progress on hold
and press key. To retrieve the call on hold, press Talk key again after
replacing the battery and powering on the handset.
3. Battery talk time and standby times vary depending on the talk/standby
pattern and the operating distance. Putting the handset back on the charger
cradle as often as possible is recommended for best performance.
Use only the manufacturer's provided battery and charger!
MENU (Right)
(Left) soft key, then,
to unlock.
＊
is pressed.
~38~