EnGenius FreeStyl SIP User Manual page 10

6. DND (Do Not Disturb, i.e., Silent Ring)
7. Call Logs
a. Redial: Stores 10 phone numbers (up to 26-digits each) dialed most
recently. Can perform last-number redial on all 10 numbers.
b. Received and New Call Log: Total 50-entries (16-digit phone number, 16-
character names, and Date/Time stamp), needs Caller ID service from local
telephone company.
c. Phone numbers and names can be saved into phone book while in display.
8. Call Manager: Includes: blocking incoming call, outgoing call and assign line
dedication, line selection.
a. Incoming Call:
a-1. PA On/Off: Enable or disable the Broadcast feature from other
handsets or the base station. When PA is Off, the handset cannot receive
Broadcast calls from the base station or other registered handsets, but it
can Broadcast to the base station or other registered handsets.
a-2. Line On/Off: Enable or disable the ability to receive incoming calls
from telephone line call. When Line is Off, the handset cannot receive
incoming calls from a telephone line call, but it can still make outgoing
calls.
a-3. Int. On/Off: Enable or disable the Intercom from other handsets or the
base station. When Int. is Off, the handset cannot receive Intercom calls
from other registered handsets, but it can Intercom to other registered
handsets.
b. Outgoing Call
Select the mode of line selection (Auto/Manual/Predefine line/Off) when
you make a line call.
b-1. Auto: A handset will select one of available lines from subscribed
bases before making an outgoing call. (Default)
~19~
b-2. Manual: A handset will be prompted to select from a list of available
lines before making an outgoing call. (1 for telephone line, 2 for SIP call)
b-3. Off: Disable the capability to make an outgoing call.
c. Call Barring
c-1. Block users from dialing long distance or international calls.
c-2. Up to 5-digits of each Call Barring setting, up to 5-entries allowed.
Changing requires you to enter the "Call Settings" (MENU-4-3).
Note: You must key in the accurate user ID and password to perform this
feature. The default password is "0000."
9.
Any Key Answer (except and
a.
If you enable Any Key Answer while you have two incoming line calls
simultaneously, you can answer the SIP call or PSTN call by pressing
the scrolling key.
10. KeyGuard
a. When the KeyGuard is selected, all keys will be locked.
Press UNLOCK (Left) soft key followed by
b. The KeyGuard will be automatically enabled once returning back to idle
mode for 15-seconds.
11. Dialing Prefix
a. Up to 14-digits, including pause(s), one access code can be pre-
programmed to be added automatically in front of the dialed number
when dialing from call logs, phone book, and dial-and-send dialing.
12. Call Hold
a. Places call on hold.
13. Mute
a. Press MUTE (Left) soft key during talk, the handset microphone will be
muted.
Press UNMUTE (Left) soft key to release it.
14. Phone Book
a. 50-entries, each stores a phone number or handset ID (up to 26-digits) and
name (up to 16-characters).
b. Alphabetically sorted display and search by letter.
SILENT soft Key)
to release it.
＊
~20~