Additional Handset Features - EnGenius FreeStyl SIP User Manual

e. The last line displays the left and right soft keys.
2. Ringer
a. Rings to an incoming call and intercom call.
b. Distinctive alert sounds indicating various events:
(1) Single beep: successful key entry.
(2) Double beep: indicates power on/off.
(3) Triple beep: failed operation.
(4) Periodic 1-Long 2-Short beeps (every 1 minute): low battery warning; out of
range; call on hold.
Re: No beep: invalid key entry.
3.
TALK/FLASH ( )
a. Places or answers a telephone or intercom call.
b. Sends a Flash signal to the phone line to retrieve a dial tone after the call
ends, or to perform the Call Waiting feature provided by local phone
companies during a call.
4.
SPEAKERPHONE ( )
Press and hold the key for over 2-seconds to enable/disable the speakerphone
during incoming, outgoing or intercom call.
5.
2-WAY INTERCOM ( )
a. Places an intercom call to another handset, a group handset (group paging)
or all registered handsets.
b. Intercom calls are digital, full duplex, and are conducted without the
assistance of the base station.
6.
BROADCAST ( )
a. Half duplex broadcasting to handsets for immediate announcement.
b. Half duplex broadcasting to base stations.
Re：Press the key on the left top corner of the handset to activate the
broadcast function.
7.
Left/Right Soft Keys (
a. Make menu selection.
8.
Up ( ) /Down ( ) Scrolling Keys
a. Scroll through records and menu selections.
)
~17~
b. Adjust receiver voice volume when in the Talk mode.
c.
Press to enter received call log when in the Standby mode.
d. Press
to enter phonebook when in the Standby mode.
9.
END; On/Off Key ( )
a. Ends a call.
b. Leaves current menu operation, up one level.
c. Press for 3-seconds to turn off the power.
10. CALLER ID Key (
)
a. Review caller ID list.
b. Including received and missed caller ID.

Additional Handset Features

1. Multiple Handsets Registration
a. Up to 10 handsets can be registered to a base station.
b. ID 10-19: Individual Handset IDs.
c. ID 1~7: Group IDs. Handsets can "subscribe" from the handset menu to
group(s) and be paged when a landline caller or an intercom caller enters a
Group ID.
2. Ringer Vibrator
a. Two (2) options for Line (incoming call) ringing and intercom ringing.
b. Six (6)-level ringer volume selections
(Off/Low/Medium/High/Vibrate/Vibrate & High) for each option.
c. Eight (8) ringer type selections for each option.
3. Caller ID
Displays incoming call phone number and name on the LCD (needs Caller ID
service from local telephone company).
4. Call Waiting with Caller ID
Displays 2 nd incoming call information on the same phone line when 1
progress (needs Call Waiting with Caller ID service from local telephone
company).
5. Name Tagging with Caller ID
Match the Caller ID with the phone book entries; once matched, the LCD
screen will display the name or nickname instead of pure Caller ID info (needs
Caller ID service from local telephone company).
st call is in
~18~