EnGenius FreeStyl SIP User Manual page 35

(1)
Press or to turn on or off the dial prefix feature. Default =
Off.
(2) If "On" is selected, the handset is prompted to enter the prefix
number, up to 14-digits can be entered.
(3) Use Delete (Left) soft key to edit prefix number.
(4) Press SAVE (Left) soft key to confirm the selection.
(5) When this feature is turned on, the LCD will prompt the user "Dial
Prefix? Yes or No" on each outgoing phone call from call logs, phone
book, and dial-and-send dialing, the current prefix is also displayed.
Re: the prefix number will be added automatically in front of the
dialed number if press
(6) This feature is useful for access code, calling card, and credit card
calls, etc.
b. Press 2 to Group Select: see Handset Group Subscription on page 38 .
c. Press 3 to set Call Manager: see Call Manager operation on Page 48.
d. Press 4 to set Feature Call: see Feature Call operation on Page 45.
6. Press 5 to set Phone Settings:
a. Press 1 to set Mic Gain: See Mic Gain operation on Page 51.
b. Press 2 to set Any Key TALK:
Use CHANGE (Left) soft key to select and confirm "On" or "Off."
Default is "Off."
Re: When set "on," press any key (except
the incoming call.
c. Press 3 to set LCD Contrast:
(1)
Use or to scroll through option 1~8. Default is 4.
(2) Press SAVE (Left) soft key to confirm selection.
d. Press 4 to set LCD Backlight:
(1)
Use or to scroll through option 1~3 (1. 8-seconds 2. On 3.
Off ). Default is "8-seconds."
(2) Press SAVE (Left) soft key to confirm selection.
e. Press 5 to set Name Tag:
(1)
Use CHANGE (Left) soft key to select and confirm "On" or "Off." Default
is "Off."
YES (Left) soft key.
and SILENT key) to answer
~69~
(2) Press SAVE (Left) soft key to confirm selection.
Re: When Set "On," the handset match the Caller ID with the phone book
entries, once matched, the LCD screen will display the name or
nickname instead of pure Caller ID info (needs Caller ID service from
local telephone company).
f. Press 6 to set Language:
(1)
Use or to scroll through option 1~3 (1. English, 2. Spanish, 3.
French). Default is "English."
(2)
Press SAVE (Left) soft key to confirm selection.
g. Press 7 to set Custom Name:
(1) Enter characters using the Character Table and method discussed in the
Phone book section.
(2) Use
or to move the cursor backward or forward to insert (to
the left of the cursor) or delete (the character above the cursor, or left
of the cursor if cursor is on the right of the last character).
(3) Press SAVE (Left) soft key to confirm setting.
Re: Once entering the custom name, the greeting of the LCD in standby
mode will be changed as entered.
Default greeting is "FreeStyl SIP"
h. Press 8 to Change Password:
(1) Enter original (4-digits) of handset then press
entering this menu.
(2) Enter new password (4-digits) then press
new password.
i. Press 9 to set Headset Ring: See Headset Ring operation on Page 52.
7. Press 6 to set Base Settings:
When entering this menu, you must enter Base PIN code first (4-digits).
Re: The PIN code is for Base Settings. Default is "0000."
a Press 1 to set Assign Next HS:
Enter 2-digit handset ID then press
(1)
When registering a new handset, the base will assign the specific
(2)
handset ID, which is assigned in advance to the new handset.
b. Press 2 to set Clear HS:
OK (Left) soft key when
SAVE (Left) soft key to confirm
OK (Left) soft key.
~70~