Visual Message Waiting Indicator (Vmwi); Adjust Handset Microphone Gain; Adjust Headset Ring - EnGenius FreeStyl SIP User Manual

b. Press OPTION (Right) soft key to delete or edit the Call
Barring codes.
Up to 5 sets of Call Barring codes can be programmed.
c. If you want to block all outgoing calls, enter
＊＊" 5 "＊" keys, then press
save it, and all outgoing calls will be restricted.

Visual Message Waiting Indicator (VMWI)

VMWI feature supports the FSK message and stutter tone detection, which is
received from the telephone line; it will activate a message icon on the handset.
Notes:
1. A subscription to the telephone company's voice mail service is required.
2. If the handset still indicates the icon, even after you have listened to all messages, turn it
off by pressing and holding "Caller ID" key on the handset.

Adjust Handset Microphone Gain

If you will use the handset in different workplaces or environments, you can adjust
the handset microphone gain to obtain a better voice quality that is suitable for
various locations.
a. Press MENU (Right) soft key while the handset is in the standby mode.
b. Press 5 (Phone Settings), followed by
c. Use
or key to scroll the "Standard," "Medium" and "Low"
options.
d. If you are using the handset in quiet environments, like an office or
meeting room, the "Standard" level is recommended.
If you are using the handset in a noisy environment, like a factory or
outdoor place, the level of "Medium" or "Low" is recommended.
"＊ ＊ ＊
SAVE (Left) soft key to
1 to enter the "Mic. Gain" menu.
~53~

Adjust Headset Ring

When using the headset, you can change the ringer to emit from either the handset
speaker or receiver of headset to avoid missing calls.
a. Press MENU (Right) soft key while the handset is in the standby mode.
b. Press 5 (Phone Settings), followed by "9" to enter the "Headset Ring"
menu.
c. Select On , so the ringer emits from the headset receiver; if
selected, the ringer will emit from the handset speaker.
Off is
~54~