Switch-On Sequence And Device Status - Bosch Rexroth ctrlX SAFETY SAFEX-C.12 Operating Instructions Manual

32/83 ctrlX SAFETY | Commissioning
R911405651, Bosch Rexroth AG, DOK-XSAFE*-SAFEX-C.1XC-IT03-EN-P, Edition 03
7.3

Switch-on sequence and device status

After each restart of the ctrlX SAFETY compact safety controller, the following phases are
run through with error-free operation and displayed as the device status in the ctrlX SAFETY
Engineering programming software:
Tabelle 15: LED device diagnostics (Lightpipe, PF01)
PF01 Startup phase,
device status
-
Init,
Self-test,
Stop,
BusInit
RunIntern
Run
Run
Alarm
Error
Color Flashing
pattern
- Off
Yellow Flashing
Yellow Permanently
illuminated
Green Flashing
Green Permanently
illuminated
Red Flashing
Red Permanently
illuminated
Meaning
No voltage supply
The controller is in the
startup phase or STOP or
a program/firmware
download is being
performed.
Local operation of the
device as FSoE master
(FSOE slave user not yet
in Run)
The controller is
functioning correctly; the
application is running, but
has not (yet) been
validated.
The controller is
functioning correctly; the
application is running and
validated.
Alarm (application error) -
the device is in a safe
operating state. Error
status and safety program
1)
can be reset.
Fatal error - the device is in
a safe operating state. The
error state can only be
reset via POR.