Table of Contents
Advertisement
12/83
ctrlX SAFETY | Safety instructions
R911405651, Bosch Rexroth AG, DOK-XSAFE*-SAFEX-C.1XC-IT03-EN-P, Edition 03
2.6
Product- and technology-dependent safety instructions
The use of the devices must be restricted to their intended use in accordance with the list
above. Furthermore, the data values specified in Sections "9.1 and 10.1Device
characteristics" must be observed.
The content of this manual is limited to describing the basic functionality of the devices and
their installation. The programming and reparameterization of the devices are described in
more detail in the "Programming manual for ctrlX SAFETY SAFEX-C.1* devices with ctrlX
SAFETY Engineering DOK-XSAFE*-SAFEX-C.1XC-PRxx-DE-P. Knowing and
understanding that manual is a mandatory prerequisite for new installations or modifications
of the device function or device parameters.
Any use of the devices contrary to the rules and conditions listed here can:
result in injury or death of persons, as well as damage to connected devices and machines
The guidelines and standards of the respective application must be observed. The
configured monitoring functions as well as their parameters and connections must be
verified via a validation report.
Never open the housing and/or make alterations on your own accord
Never install or commission damaged products. Please complain any damage to the
transport company immediately.
Inputs and outputs for standard functions and the digital and analog data transmitted via
communication devices cannot be used for safety-related applications.
Working with electrical components
Destruction of electrical components and risk of injury due to electrical voltage.
Perform wiring work only with appropriate qualifications and taking into account the
safety instructions. For storage and transport, the conditions according to EN 60068-2-6
with regard to the values specified in Sections 9.1.2 and 10.1.2 must be observed.
The wiring and connection instructions from the "Installation / Assembly" section must be
observed.
Commissioning (i.e. the start of the intended operation) is only permitted if the EMC
directive is complied with. The EMC test specifications EN 55011:2009 + A2:2010 and
EN 61000-6-2:2005 were used as a basis.
WARNING
CAUTION
Advertisement
Table of Contents
