Detection Of Elbow's, T's And Bends In Pipe - FujiFilm PL-G.MAX Operation Manual

OPERATION IN EACH SITE SITUATION
6-6 Detection of Elbow's, T's, and bends in a pipe
Setting up the Transmitter
Please select either Induction mode or Direct mode
In accordance with the site conditions.
Using the Receiver
(1) While using the receiver in the direction of the arrows, the receiver will be most sensitive.
When passing through Point ③, the bar graph will decreases sharply.
(2) Find the maximum point of the sensitivity by moving the receiver in a circular motion
In the direction of Ⓒ and Ⓑ to find where the sensitivity decreases.
(3) Find the maximum point in sensitivity around ② ②' and plot
① ①' and ② ②' to help find the bend at point ③.
010
Ⓑ
Ⓐ
Ⓒ
080 080
③
②
①
②'
①
'
- 41 -