Table of Contents
Advertisement
PRINCIPLE & USAGE
3-4 Transmitter Auto Power Off & Continuous Power On Mode
•
AUTO-OFF MODE: When the Transmitter is turned ON, it
automatically defaults to operation in auto-off mode. After one
hour of use, the Transmitter will turn off to preserve battery life.
Simply turn the Transmitter back on to continue locating.
•
CONTINUOUS MODE: If you wish to keep the Transmitter on
during use, the Transmitter will stay "ON" until the batteries are
depleted.
The following are instructions on how to enable "CONTINUOUS",
with the mages on the left acting as guides.
1.
Turn off the Transmitter
2.
Hold down the Frequency key
3.
Turn on the Transmitter (While still holding down Frequency)
The Transmitter LCD screen should display "CONTINUOUS",
4.
and the tool is now functioning continuously.
NOTE:
Turning off the transmitter can not be set to "CONTINUOUS" as a
default setting, follow aforementioned steps when this mode is
required.
- 17 -
Advertisement
Table of Contents
