Table of Contents
Advertisement
INSTALLATION OF TRANSMITTER
4-1-3 Detected by External Coil
External Coil.
Transmitter.
Pipeline.
The External Coil Mode requires the optional External Coil.
1. The External Coil Mode is useful for locating short Branch Pipelines, Power Cables and Telephone Cables.
2. Clamp the External Coil on the pipeline or cable as shown by the above figure.
Note:
To avoid electric shock, wear rubber gloves while the External Coil is clamped on the power cable, wear
3. The Transmitter is operated in the same way as the Direct Mode. 83kHz is used for the External Coil Mode.
- 21 -
Advertisement
Table of Contents
