Table of Contents
Advertisement
To operate the receiver in AC/CP mode, follow these instructions:
1.
Push the Power key
2.
Push the Frequency Selection Key
3.
Select Maximum Mode or Bar Mode with the Mode Selection Key
Use Maximum mode initially for sharp peak indication of cables. Sensitivity increases with bar mode but peak indication over cable is
wider.
OPERATION OF RECEIVER
5-2-8 AC/CP Mode
AC/CP mode does not require the use of the transmitter.
and confirm that there is enough battery remaining to operate the receiver.
and choose the Live Cable Mode as displayed on the LCD screen.
.
- 33 -
Advertisement
Table of Contents
