Table of Contents
Advertisement
② Press 1 time
③ Transvers depth measurement screen
27kHz
051
Marker
036
LED Lighting
L
Depth of buried pipe = L x 2
OPERATION OF RECEIVER
① Press 1 more time
S21
Bar graph
100
LED Lighting
* Right on the
buried pipe
L
5-2-5 Transverse Depth Measurement
Set the receiver to MAXIMUM/PEAK mode:
1.
Press the Depth key once:
2.
The display will then say "Pull Up".
Without pulling up, press the Depth key again:
3.
The receiver should now be in Transverse Depth Measurement
mode.
Move the receiver along one of the perpendicular sides to
4.
the pipeline, as shown in the diagram to the left.
Mark the point where the marker and bar graph align. The
5.
buzzer should also be audible.
Repeat the process on the other side of the pipeline.
6.
The total distance equals the depth. This method is suitable for
depths of 0.5-2.0 meters.
To return to the MAX/PEAK mode, press the Sensitivity
Adjustment key.
LED Lighting
- 30 -
036
Advertisement
Table of Contents
