Table of Contents
Advertisement
The Radio Mode does not need the Transmitter. the PL-G Receiver can locate pipelines by using magnetic fields induced onto
the pipeline.
Push the Frequency Selection Key 2 and choose the Radio Mode displayed on the LCD screen.
1.
Select MAXIMUM / PEAK Mode with the Mode Selection Key 3.
2.
Adjust the sensitivity with the Sensitivity Adjustment Key 4.
3.
NOTE: The depth of a pipeline cannot be measured when in RADIO Mode.
Use MAXIMUM Mode to measure the depth of a pipeline.
OPERATION OF RECEIVER
5-2-7 Radio Mode
- 32 -
Advertisement
Table of Contents
