Table of Contents
Advertisement
Blinking
83 kHz
<< Bluetooth >>
Wait connection
Solid
83 kHz
<< Bluetooth >>
Established
connection
Invisible
83 kHz
<< Bluetooth >>
Failed
connection
Invisible
83 kHz
<< Bluetooth >>
Interrupted
connection
OPERATION OF RECEIVER
①
S40
S26
To learn more about the PL-AP Android App and
S32
how to use it, please refer to the PL-AP App Manual.
If a Bluetooth connection is not established within 60 seconds,
the receiver will display "Failed Connection".
To interrupt the connection process, press the Sensitivity Up or
Down button. The receiver will then revert to the previous
operation mode.
S26
- 29 -
BLUETOOTH DEPTH & DATA COLLECTION
(Bluetooth app functionality)
receiver comes equipped with Bluetooth, a wireless
The
communication method. With this, you can record depth
information to a smartphone using the PL-AP Android app. You
may find this on the Android Play Store.
Connecting your PL-G MAX Receiver with the
Bluetooth PL-AP Android App:
Open Bluetooth settings on your Android device and have it
1.
ready. Make sure it is still OFF in this step. Refer to page 6 to
learn how to find the Bluetooth settings.
Turn on the PL-G Receiver by pressing the red power button,
2.
and wait until "Processing" is complete.
Hold down the "Depth" button on the PL-G until it says
3.
"Wait Connection".
Quickly, on your Android device, turn your Bluetooth on and
4.
connect to "PL-G.MAX" as soon as it appears. If prompted,
confirm the connection by selecting PAIR or OK.
Quickly find and open the PL-AP app and select "PL-G".
5.
Quickly Select the "Data Transfer" button. This button should
6.
then turn into a "Stop Transfer" button.
The PL-G receiver will now say "Established Connection",
7.
and you will be instructed to immediately begin operating the
Receiver.
Advertisement
Table of Contents
