Serial Line Settings; Modifying Baudrate - Moxa Technologies oncell G2100 Series User Manual

OnCell G2100 Series User's Manual

Serial Line Settings

ATTENTION
Changes to the serial communication parameters take effect immediately. You will need to update
your terminal settings to match any changes in the serial communication parameters.
Configuration can also be performed with the AT*SERIAL command or OnCell Configurator.
The default serial communication parameters are 115200 bps, 8 data bits, None parity,
RTS/CTS flow control, and 1 stop bit. Before changing the settings, first connect the RS-232
port of the OnCell G2100 Series modem to a host PC. Open PComm Terminal Emulator with the
current communication parameters.

Modifying Baudrate

1. Type AT+IPR=x and press Enter, where x corresponds to one of the following baudrates:
300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 0 (autobauding). For
example, type AT+IPR=9600 to change the baudrate to 9600 bps:
2. Modify the terminal settings to match the new serial communication parameters.
4-10
AT Command Set