Face Detection - GeoVision GV-TBL Series User Manual

3.5.1.7 Face Detection

The Face Detection function can detect for and capture face(s) to be sent to an FTP server.
Select the checkbox next to Face to enable and click
1. Once enabled, define the detecti
or select Full Screen next to Detection Area to set the entire image as detection area.
2. Configure the following functions as needed:

Detection Sensitivity: Drag the slider t

Snapshot Mode: Select Intelligent Recognition to set the maximum of
face snapshots under Max. Same Thumbnail Image.

Face Overlay: Enable to include the camera's OSD on
3. Under Trigger Actions, select Upload Image (Original) and/or Upload Image (Face) to
upload a snapshot of the entire image and/or a snapshot of the face detected,
respectively, upon face detection.
4. Follow Step 6 in 3.5.1.1 Cross Line
N ote: The Counting feature is currently nonfunctional.
to configure.
Figure 3-37
on area, either b y drawing a desired area on the image
o adjust the detection sensitivity.
.
Administrator Mode
3
repeated
the snapshot(s) captured.
115