System; Time - GeoVision GV-TBL Series User Manual

3.9 System

This section allows you to set the camera time and update the firmware.

3.9.1 Time

You can use the following methods to adjust the system time of your camera.
Time
1. Select a Sync Mode.
 Sync with System Configuration: Select a Time Zone, manually set a time by
clicking on the System Time, or synchronize with the computer time.
 Sync with NTP Server: To synchronize with a network time server, type the IP
address of the network time server next to NTP Server Address and specify the
Update Interval.
 Sync with Managemen
Management Server (ONVIF).
 Sync with Latest Server Time: The device time is synchronized with the latest
updated time, either on ONVIF or the Web interface.
2. Select a Time Zone.
3. Next to System Time, manually set the camera's time or click Sync with Computer
Time to synchronize with the time of your PC.
4. Click Save.
Figure 3-55
t Server (ON VIF): The device time is synchronized with
Administrator Mode
3
131