Port - GeoVision GV-TBL Series User Manual

3.2.3 Port

Port
You can modify the default HTTP port, HTTPS port and RTSP port if necessary.
Port Mapping
This function can automatically forward and open certain ports on your router, allowing
connection to your camera from the Internet.
1. Enable Port Mapping, and select Mapping Type.

If you select Automatic, external ports will be automatically configured by the
router.

If you select Manual, configure external ports. External IP is applied to the camera
automatically. If the configured port is occupied, the Status will show inactive.
2. Click Save.
Note: For this function to work, your router needs to support port forwarding.
Figure 3-6
Figure 3-7
Administrator Mode
3
85