Using The Appliance; Before Initial Use; Electrical Connection; Guidelines For Operation - Silvercrest SLE 200 B2 Operating Instructions Manual

Using the appliance

Before initial use

♦ Place the appliance on a flat, dry and solid surface.
♦ Allow the appliance to remain in the usage position for approx. 30 minutes
so that the coolant can settle.
♦ Check that the water tank 4 is correctly inserted.
♦ Insert the plug w into a mains power socket.

Electrical connection

CAUTION! PROPERTY DAMAGE!
► Before connecting the appliance, compare the specifications for the
required input voltage on the rating plate with the intended voltage source
for operation. This data must agree so that the appliance is not damaged.
► The power cable w must always be easily accessible, so that the appli-
ance can be quickly removed from the mains in the event of an emergency.
► Check whether the power cable w is undamaged and that it is not routed
over hot surfaces and/or sharp edges, otherwise it will become damaged.
► Ensure that the power cable w is not taut or kinked.

Guidelines for operation

■ If the air in your living spaces is constantly excessively humid, the cause should
be identified and addressed. (Sustained - year-round - dehumidifying is generally
not a good idea.)
■ The optimal ambient temperature for dehumidifying the air is 5°C to 32°C.
Using a dehumidifier at temperatures below 5°C is redundant, as there is little
humidity in the air.
■ During operation, room temperature can increase by between 1°C and 4°C,
depending on the size of the room. This is normal.

Automatic defrosting

To ensure that the appliance does not ice up during sustained operation, it
defrosts automatically. The defrosting function is activated automatically and
cannot be switched on manually. The appliance cannot be switched off during
defrosting. During defrosting, the
lower the ambient temperature at which the appliance is operated, the earlier or
more often the automatic defrosting is activated. Once the defrosting process is
complete, the appliance resumes operation in the previous selected settings.
SLE 200 B2
AUTO DE-ICING LED u lights up. The
GB │ IE │ 11 ■