Table of Contents
Advertisement
Operation
WARNING! Local, national or international regulations may apply to the transport and storage of pressurized pedestals.
!
NOTE: It is not necessary to reduce the pedestal pressure prior to transportation or storage. To avoid the possibility of dust or
abrasive particles collecting on moving components, set the column to minimum height.
Transportation and storage
The column and skid may be separated to facilitate
transport or storage.
To separate the column and skid:
1.
Apply the brakes (14).
2.
Set the control valve (2) to the WORK position.
22
14
14
14
14
3.
Lower the top stage (4), then set the control valve to PUMP.
4.
Remove the load and secure any trim (8) weights in the trim
weight stowage (16).
16
16
14
14
Advertisement
Table of Contents
