Table of Contents
Advertisement
Operation
Transportation and storage
WARNING! Local, national or international
!
regulations may apply to the transport and
storage of pressurized pedestals.
NOTE: It is not necessary to reduce the pedestal
pressure prior to transportation or storage. To
avoid the possibility of dust or abrasive particles
collecting on moving components, set the column
to minimum height.
The column and skid may be separated to facilitate transport
or storage.
To separate the column and skid:
1.
Lower the top stage (1) and engage the safety catch (2 ).
2.
Lower the elevation tube as far as possible and tighten the
bottom clamp (3).
3.
Remove the load.
4.
Release the skid clamp (4) and the rubber securing straps
(5). Lift the struts clear of the foot supports. Use the steering
ring to lift the telescopic column vertically until it is clear
of the skid assembly, then secure the struts (7) with the
retaining strap (6).
WARNING! The column will be unstable if stood
!
on its base or on the folded struts.
2
Depress each leg locking plunger on the underside of the skid
and fold the legs.
20
2
2
5
5
d
4
5
5
5
Advertisement
Table of Contents
