Before Inverting - Teeter FitSpine LX Inversion Table Assembly Instructions Manual

NEXT STEP
Locate User Guide and
Get Started with Inversion
Refer to the User Guide attached to your FitSpine LX Inversion Table.
This is your step-by-step guide to customizing your user settings for a
smooth and effortless inversion experience.
Ensure User Guide Remains on Product
Figure 30 & 30a: If the User Guide is not already attached,
secure the chain to the A-Frame through the designated
hole in the Hinge Plate. Allow the User Guide to hang
freely on the outside of the A-Frame Spreader Arms so it
doesn't interfere with the rotation of the Table Bed.
IMPORTANT: Once attached to the A-Frame, DO NOT
remove the User Guide. It should remain permanently
attached to your inversion table to serve as a reference
Figure 30
for all users in regard to proper adjustment and use of
the equipment.
WARNING
!
Read the User Guide thoroughly before using your
Teeter Inversion Table. Improper settings could result
in serious injury or death!
Figure 30a
The LX4 is shown here. Your actual model may vary.
17