Removing The Y Veyor-Cable - JUKI RS-1 Maintenance Manual

1-4-4. Removing the Y Veyor-Cable

1) Disconnect the binding of the connector bracket at the entrance of the Y-axis cableveyor
and the relay connector.
2) Disconnect the binding of the connector bracket at the Exit of the Y-axis cableveyor and the
relay connector.
Figure 1-4-4-2
3) Detach the cover of the Y cableveyor and remove the cable to be replaced.
Maintenance Guide
Figure 1-4-4-1
1-23
Figure 1-4-4-3