4-2 Replacing the CCD Camera and Lens
1)
Remove the camera unit. See section 4-1 [Replacing the OCC Unit].
2)
Remove the CCD camera and lens.
3)
Reassemble the components in the reverse order of disassembly.
4)
After replacement, refer to 4-7 [Readjustment Items After Replacing OCC Unit].
Perform necessary adjustments and enter MS parameters.
∗
The CCD camera assembles the label surface to the front.
At this time, apply ThreeBond 1401B to the screw thread parts of the lens (Camera
∗
connections).
CCD camera
Hexagon socket head
cap bolt M4 L=12
Apply Three Bond 1401 B
(Thread part of lens)
Maintenance Guide
4-2
Label surface
Hexagon socket head
cap bolt M2 L=4
Lens
CCD camera
Lens