Replacing The Safety Cover Lock Cylinder - JUKI RS-1 Maintenance Manual

11-4 Replacing the Safety Cover Lock Cylinder

[Removal]
1) Loosen the M4×10 SEMS cap bolts  (2 pcs.) and pull out the COVER  in the direction
indicated by an arrow to detach it.
2) Remove the M6×12 SEMS cap bolts  (2 pcs.) to detach the SC_LOCK unit .
Maintenance Guide
11-6
SC_LOCK unit is located
at 2 locations inside the
machine main unit.
 M4×10 SEMS cap
bolt (2 pcs.)
 SCL_COVER
 SC_LOCK unit
 M6×12 SEMS cap
bolt (2 pcs.)