Replacing The Actuator Valve; Replacing The O-Ring - JUKI RS-1 Maintenance Manual

8-2-5 Replacing the Actuator Valve

1) Disconnect the air tube that is connected to the actuator valve.
2) Remove the actuator valve.
3) Detach the half-union and elbow union, and then replace the actuator valve.
4) Reassemble the components in the reverse order of disassembly.

8-2-6 Replacing the O-Ring

1) Remove the ring holder, and then replace the O-ring.
2) When assembling the O-ring, apply the grease (6459 grease N) to the O-ring.
3) Reassemble the components in the reverse order of disassembly.
Elbow union
Washer assembled round head
screw M4 L=30
Maintenance Guide
Actuator valve
Flat head screw
M4 L=8
Half-union
Ring holder
O-ring (* Apply the grease when
assembling the O-ring.)
8-12