Switching The Conveyor Direction - JUKI RS-1 Maintenance Manual

5-14 Switching the Conveyor Direction

5-14-1 Switching the Conveyor Direction
1) Switching WAIT 2 sensor
① There are two sensors at the center of conveyance, select either one according to flow
direction.
Left to right flow
Right to left flow
② Remove the fiber from the WAIT2 sensor amplifier unit, Replace it with a fiber that is not
inserted.
* Insert the fiber so that the front side of the machine projects light and the back side receives
light.
From left to right case
Maintenance Guide
Use the sensor on the front left side of the unit.
Use the sensor on the front left side of the unit.
From right to left case
5-31
Light receiving side
Light emitting side