Replacing The Occ Coaxial/Angle Light Board - JUKI RS-1 Maintenance Manual

4-3 Replacing the OCC Coaxial/Angle Light Board

1) Remove the light unit. See section 4-1 [Replacing the OCC Unit].
2) Remove the OCC coaxial light board.
3) Remove the OCC angle light board.
4) Reassemble the components in the reverse order of disassembly.
5) After replacement, refer to 4-7 [Readjustment Items After Replacing OCC Unit].
Perform necessary adjustments and enter MS parameters.
Maintenance Guide
Coaxial light board
4-3
Washer assembled round
head screw M3 L=6
Angle light board
Diffuser
Flat head screws M3 L=10