E Bank Relay Pcb Asm (40128876); Outside View Of Board; Setting The Switches; Adjusting The Volumes - JUKI RS-1 Maintenance Manual

12-11 E BANK RELAY PCB ASM (40128876)

12-11-1 Outside View of Board

Figure 12-11-1-1 shows the outside view of E BANK RELAY PCB ASM.
Use this outside view as reference for the switch settings and volume adjustment described in the
following sections.
Figure 12-11-1-1 Outside View of E BANK RELAY PCB ASM

12-11-2 Setting the Switches

The switches have already been set at the delivery. Before mounting the PCB, check the switch
settings.
1
2
2
3
4
2
5
6
2
7
8
2
DSW3
The SW 1 and 2 are intended for the function revision. For details, see the REV control table
(40129496).

12-11-3 Adjusting the Volumes

The volumes have already been adjusted at the delivery of the PCB. So, mount the PCB in the
machine and check the set voltage values. See "RS-1_QA Table E09_E BANK RELAY board VAC
sensor level adjustment".
Maintenance Guide
O
N
O
1
N
2
2
3
4
2
5
6
2
7
8
2
DSW4
12-48