JUKI RS-1 Maintenance Manual page 308

13-2-3-3 Loading the Backup Data to the Hard Disk Drive
CAUTION
Select [File] and [Control Date Management...] to restore the control data in the SSD.
For the detailed procedure of restoration, see Section 13-2-4, "Restoring the control data from a USB
memory" in the "Instruction Manual."
∗ After restoring the backup data, check the machine settings and adjust it if necessary.
∗ If there is no backup data for the MS parameters, obtain the MS parameters again.
Maintenance Guide
Always start the home position return of the machine after
the backup data has been restored. Failure to do so may
cause system runaway.
13-23
(Restoring the backup data)