Thermo Scientific Barnstead LabTower AFT
Pure water system
10. Installation
Before the pure water system can be put into operation, it must be to move to the back
of designated wall with screws.
Note: The distance from the pure water system to the wall is 20 mm.
Use the assembling kit available in wall bracket, the 2 screws 4x40 mm and the 2 dowels
(Ø 6 mm)
Plug the wall bracket into the backside of the pure water attachment, as shown graphi-
cally on the following page.
The wall bracket must shown with the notches (see position "X") down.
Now position the pure water system at the proposed wall and attach it with the dowels
and screws.
17