Sinclair SCV-750EB Service Manual page 40

6.4 Compressor and Inverter Module Protection Control
For SCV-750EB and SCV-1400EB:
The protection current for SCV-750EB is 54A, for SCV-750EB is 106A.
Current > protection current
Compressor current protection, error code P4/P5 is displayed
Notes:
1. P4 is the protection for System A, P5 is the protection for System B.
For SCV-900EB and SCV-1800EB:
The protection current for SCV-900EB is 33A, for SCV-1800EB is 60A.
This control protects the compressors from abnormally high currents and protects the inverter modules from abnormally high
temperatures. It is performed for each compressor and inverter module.
Current > protection current
Compressor current protection, error code P4/P5 is
Notes:
1. P4 is the protection for System A, P5 is the protection for System B.
When the compressor current rises above protection current, the system displays P4 or P5 protection and all the units stop
running. When the compressor current drops below protection current, the compressor enters re-start control.
1
Module temperature > 100°C
Inverter module temperature protection, error code PL is
displayed
Notes:
1. The module temperature is calculated by inverter module.
When the module temperature rises above 100°C, the system displays PL protection and all the units stop running. When the module temperature drops below
70°C, the compressor enters re-start control.
38
Normal operation
Current < protection current
Normal operation
Current < protection current
Normal operation
Module temperature
CL is displayed when PL error occurs 3
times in 100 minutes, a manual
system restart is required before the
system can resume operation.
When P4 or P5 protection occurs 3
times in 60 minutes, a manual system
restart is required before the system
can resume operation.
1
< 70°C
CL is displayed when PL error occurs 3
times in 100 minutes, a manual
system restart is required before the
system can resume operation.