Transmitter Phase Setup; Transmitter Phase Test - RadioLink A560 Instruction Manual
3d fixed wing vertical flight with 1 switch
Hide thumbs
Also See for A560:
- Instruction manual (28 pages) ,
- Assembly & disassembly instructions (6 pages) ,
- Assembly & disassembly instructions (6 pages)
Table of Contents
Advertisement
RadioLink Electronic Ltd
www.radiolink.com
8.2 Transmitter Phase Setup
Please set the direction of CH3 to Reverse, and other channels CH1/CH2/CH4 to Normal.
Take AT9S Pro as example( same as AT10II/AT9S/AT10/AT9).
Steps: Long press Mode to enter BASIC MENU - rotate Dial to REVERSE - Press Push to
enter the menu - rotate Dial to 3:THRO - change NOR to REV - Long press Push for 1 second
to confirm.
8.3 Transmitter Phase Test
Please refer to A560 RTF Chapter 8.2 Transmitter Phase Test.
Thank you again for using RadioLink products!
30
Advertisement
Table of Contents
