Servo Phase; Transmitter Phase - RadioLink A560 Instruction Manual

It is advised to lift up the model head with a certain angle to ensure the calibration accuracy
and it will be recorded by flight controller once the attitude calibration is complete with success.
Pull both joysticks to outside corners as below and hold for more than 3 seconds. The green
led on flight controller Byme-A flashes once means the calibration completed.

2.3.3 Servo Phase

Make sure to switch to MANUAL MODE(eg. T8FB SWA-UP/DWN, SWB-DWN) to check servo
phases are correct before each flight. Below Mode 2 is explained as example.

2.3.3.1 Transmitter Phase

（1）Aileron phase
Toggle the aileron joystick to left, left aileron is lifted and right one is pressed; toggle the
joystick to right, left aileron is pressed and right one is lifted, meaning the aileron phase is
correct.
Left aileron
lifted
Right aileron
pressed
7
RadioLink Electronic Ltd
www.radiolink.com
Right joystick to left