Required Resources; Pre-Installation - Lippert Promaster Installation Manual

Required Resources

• Standard screw gun
• Phillips screw driver
• #8 x 1 screw

Pre-Installation

Remove Promaster Sliding Door assembly from box and place parts flat on a surface for easy assembly (Fig. 1).
End Cap
Upper Sliding Channel
Side Support
The rope mechanism is attached to the lower and upper sliding channels. Make sure the rope
Rev: 05.23.22
1X
3 x 30
Lower Sliding Channel
mechanism does not tangle with the sliding channels.
Fig. 1
3X
3 x 20 3 x 20
Filler Panel
Page 3
2X 2X
3.9 x 13
Screws
CCD-0006239