Failure to correctly follow the provided instructions may result in death, serious personal injury, severe product and/or property damage, including voiding of the Lippert limited warranty THE “WARNING” SYMBOL ABOVE IS A SIGN THAT A PROCEDURE HAS A SAFETY RISK INVOLVED AND...
NOTE: Hatches should not be considered as stiffening members. Lippert recommends that the deck be adequately stiffened to prevent distortion during heavy DO NOT OPEN AND CLOSE THE HATCH MORE weather.
Page 4
Do not remove the lid when securing the hatch to the deck. NOTE: For best results, place a small amount of silicone sealant into the fastener holes before securing the hatch. 8. Check for correct operation of the hatch lid. lippert.com 432-LIPPERT (432-547-7378) Rev: 08.14.24 CCD-0008798...
4. Open the hatch and check for correct operation. Re-adjust if necessary until the desired operation is achieved. Do not use lubricants on the friction lever, as this will adversely affect its function. Fig.6 Fig.7 lippert.com 432-LIPPERT (432-547-7378) Rev: 08.14.24 CCD-0008798...
Lewmar Some states and countries do not allow guidelines and standards of workmanship. limitations on how long an implied warranty lasts, so this limitation may not apply to you. lippert.com 432-LIPPERT (432-547-7378) Rev: 08.14.24 CCD-0008798...
Page 9
Email: techsupport@lewmar.com Email: customerservice@lci1.com The contents of this manual are proprietary and copyright protected by Lippert. Lippert prohibits the copying or dissemination of portions of this manual unless prior written consent from an authorized Lippert representative has been provided. Any unauthorized use shall void any applicable warranty.
Need help?
Do you have a question about the Lewmar 30352900 and is the answer not in the manual?
Questions and answers