Cpu Installation - SOLTEK SL-65KVB User Manual

65KVB/65KV2

2- 1 CPU INSTALLATION

WARNING !!!
Never run you processor without the heat sink properly and firmly attached.
PERMANENT DAMAGE WILL RESULT!
• Pull out the lever from the
1
socket, and then raise the le-
ver up to a 90-degree angle.
• Take notice of the red circles
2
as shown below. While insert-
ing the CPU into the socket,
you can find out there is a defi-
nite pin orientation for CPU
and socket.
• Make sure that the CPU is
3
placed into the socket tightly.
Then lower down the lever to
complete the CPU installation.
18