SOLTEK SL-65KVB User Manual page 75

MODEM Use IRQ This determines the IRQ which the MODEM can use.
Soft-Off by PWR-BTTN When Enabled, turning the system off with the on/off
State after Power
Failure
• Press <Enter> on the Wake Up Events item, then there is a list of it appears
for you to choose further setting.
Wake Up Events Enable or turn on the interrupts that you want to
LPT & COM When On of LPT & COM, any activity from one of the
HDD & FDD When On of HDD & FDD, any activity from one of the
PCI Master When On of PCI Master, any activity from one of the
The choices: 3; 4; 5; 7; 9; 10; 11; NA.
button places the system in a very low-power-usage
state, with only enough circuitry receiving power to
detect power button activity or Resume by Ring
activity.
This field lets you determine the state that your PC
returns to after a power failure.If set to off, the PC will
not boot after a power failure. If set to On, the PC will
restart after a power failure.
awaken the system from a reduced-power mode. Dis-
able or turn off the interrupts that you do not want to
awaken the system from a reduced-power mode.
VGA When Enabled, you can set the VGA awakens the
system
listed system peripheral devices or IRQs wakes up
the system.
listed system peripheral devices wakes up the system.
listed system peripheral devices wakes up the system.
Chapter4 BIOS Setup
75