Connectors Configurations; Onboard Fan Connector (Fan1/Fan2) - SOLTEK SL-65KVB User Manual

65KVB/65KV2

2-6 CONNECTORS CONFIGURATIONS

• This section lists out all connectors configurations for users' reference:

2-6-1 ONBOARD FAN CONNECTOR (FAN1/FAN2)

RT1
VIA
694X
SW1
AMR
1 4
JP3
1 3 1 3
CD_IN2
JP4 1 3 JP5 AGP 4X
CD_IN1
1 4
JP6
1 3
JP7 1 3
PCI 1
AC'97
Codec
3 3
PCI 2
1 1
PCI 3
PCI 4
PCI 5
JWOL1
These connectors support CPU/System cooling fan with +12V. When con-
necting wire to FAN connectors, users should pay attention that the red wire is
for the positive current and should be connected to pin +12V, and the black wire
is Ground and should be connected to pin GND. If your mainboard has Hard-
ware Monitor chipset on-board, you must use a specially designed fan with speed
sensor to take advantage of this function.
For fans with speed sensors, the rotation of the fan blades will send out 2
electric pulses, by which system Hardware Monitor will work out the fan rotation
speed.
NOTE 1 :
Always consult vendor for proper CPU cooling fan.
NOTE 2 :
CPU FAN supports the FAN control. You can install PC Alert utility. This will
automatically control the CPU FAN speed according to the actual CPU temperature.
Clock
Generator
JP2
1
3
JP14
Li
Battery
RT2
JBAT1
3
1
VIA
VT82C
686B
ISA
28
Onboard FAN Connector
(FAN1)
Onboard FAN Connector
(FAN2)
FAN1
CPU FAN
SYSTEM FAN FAN2
GND
+12V
SENSOR