Table of Contents
Advertisement
ACPI Function Select Enabled only if your computer's operating sys-
• Press <Enter> on the Power Management item, then there appears a list of
options for you to configure further setting.
CMOS Setup Utility - Copyright (C) 1984-2001 Award Software
Power Management
HDD Power Down
Doze Mode
Suspend Mode
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Power Management This option allows you to select the type (or degree)
Max Saving
User Define
Min Saving
tem supports the Advanced Configuration and Power
Interface (ACPI) specification. Currently, Windows
NT 5.0 support ACPI.
Power Management
User Define
Disable
Disable
Disable
of power saving for Doze, Standby, and Suspend
modes.
This table describes each power management mode:
Maximum power savings. Only Available for SL CPUs.
Inactivity period is 1 minute in each mode.
Set each mode individually. Select time-out periods
in the section for each mode stated below.
Minimum power savings. Inactivity period is 1 hour
in each mode (except the hard drive).
Chapter4 BIOS Setup
Menu Level
73
Item Help
Advertisement
Table of Contents
