65MIV-C / 65MIV2
2-6 CONNECTORS CONFIGURATIONS
• This section lists out all connectors configurations for users' reference:
2-6-1 ONBOARD FAN (JFAN1/JFAN2)
VIA
VT8605
SW1
ON
DIP
1 2 3 4 5 6 7 8
AGP 4X
JFAN2
PCI 1
PCI 2
AC'97
Codec
VT82C
686A
PCI 3
1
4
JCD1
JCD2
1
3
WOL1
JP9
1
4
These connectors support CPU/System cooling fan with +12V. When con-
necting wire to FAN connectors, users should pay attention that the red wire is
for the positive current and should be connected to pin +12V, and the black wire
is Ground and should be connected to pin GND. If your mainboard has Hard-
ware Monitor chipset on-board, you must use a specially designed fan with speed
sensor to take advantage of this function.
For fans with speed sensors, the rotation of the fan blades will send out 2
electric pulses, by which system Hardware Monitor will work out the fan rotation
speed.
NOTE 1 :
Always consult vendor for proper CPU cooling fan.
NOTE 2 :
CPU FAN supports the FAN control. You can install PC Alert utility.
This will automatically control the CPU FAN speed according to the actual CPU
temperature.
JBAT1
1
3
VIA
26
CPU FAN
SYSTEM FAN
GND
+12V
SENSOR
JFAN1
JFAN2