Connectors Configurations; 2-6.1 On Board Fan Connector (Jfan1, Jfan2) - SOLTEK SL-65LIV-T User Manual

2-6 CONNECTORS CONFIGURATIONS

• This section lists out all connectors configurations for users' reference.

2-6.1 On Board FAN Connector (JFAN1, JFAN2)

JFAN1
JP2
JP3
1 4
1 3
CD_IN1
CD_IN2 1 4
AMR
Li
Battery
AC'97
Codec
JWOL1
USB2
1 3
1
ISA
These fan connectors support CPU/chassis cooling fan with +12V. When
connecting wire to FAN connectors, users should pay attention that the red
wire is for the positive current and should be connected to pin +12V, and the
black wire is Ground and should be connected to pin GND. If your mainboard
has Hardware Monitor chipset on-board, you must use a specially designed
fan with speed sensor to take advantage of this function.
For fans with speed sensors, each rotation of the fan blades will send out 2
electric pulses, by which System Hardware Monitor will work out the fan
rotation speed by counting the pulses.
NOTE 1:
Always consult vendor for proper CPU cooling fan.
NOTE 2:
CPU FAN is supported by Hardware Monitor, with which a
warning will be given out against high CPU temperature.
VIA
VT8601T
JBAT1
1 3
PCI 1
VIA
VT82C
686B
JP7
PCI 2
1 3
16
JP8
JP9
1 3
PCI 3
8 7 6 5 4 3 2 1
SW1
DIP ON
GND
+12V
SENSOR
Chapter 2 Hardware Setup
On Board FAN Connector
(JFAN1):
On Board FAN Connector
(JFAN2):
CPU FAN
CHASSIS FAN
25
JFAN1
JFAN2