Security Page - ABB FBIP-21 BACnet/IP User Manual

68 Appendix C - FBIP-21 configuration web pages
Settings
SNTP server address 1
SNTP server address 2

Security page

￭
On the Security page, you can upload a private key and certificates for FBIP-21 to use
instead of the self-signed certificate that FBIP-21 uses as a default. You can upload
and manage Drive Composer certificate files on Security page under "Drive Composer
certificate settings". Up to four certificates are supported at a time.
FBIP-21 uses secure HTTPS (TLS 1.2) communication for the web page server. By default,
FBIP-21 does not require client authentication for the PC tool communication. You can
use client authentication to improve the system security.
If unsecured communication is required, you can enable it from Service configuration
page or by setting parameter 51.15 Service configuration bit 4. When unsecured
communication is enabled, the PC tool communication is not encrypted or
authenticated.
For more details, refer to
manual (3AUA0000094606
Note: Secure PC tool communication is possible with Drive Composer Pro version 2.7
or later.
Description
Primary server address for requesting time.
Format: IP address followed by optional port num-
ber, eg:
192.168.0.1:123
Note: If port number is missing, the default NTP
port number "123" is used.
Secondary server address used if the request to
server 1 fails.
Drive composer start-up and maintenance PC tool user's
[English]).
Value
-
-