Rewriting The Ip Configuration Of Adapter Modules - ABB FBIP-21 BACnet/IP User Manual

56 Appendix A - ABB IP configuration tool

Rewriting the IP configuration of adapter modules

1. Scan the network for adapter modules.
For instructions, see section
2. On the results list, click to select the adapter module whose IP configuration you
want to modify.
3. Below IP settings, define the IP configuration settings according to your network
configuration.
4. If you want the adapter module to use a static IP address instead of DHCP, clear
the DHCP check box.
5. To apply the new settings, click the Send settings button.
Finding adapter modules in the network (page 55).