Introduction - Infineon XMC4700 Relax Kit V1 Series Manual

restricted - NDA required!
Evaluation Board for XMC4000 Family
XMC4700/XMC4800 Relax Kit Series-V1

1 Introduction

1 Introduction
This document describes the features and hardware details of the XMC4700/XMC4800 Relax Kit Series-V1
®
equipped with an ARM Cortex
It can be used with a wide range of development tools including Infineon's free of charge Eclipse based IDE
DAVE. The XMC4700/XMC4800 Relax Kit Series-V1 are designed to evaluate the capabilities of the XMC4700/
XMC4800 Microcontroller.
Table 1 Kit Specification
Processor
Flash Memory
Data Memory
Dimensions
Clock Crystals
Power
Connectors
Debugger
Others
The XMC4700/XMC4800 Relax Kit Series-V1 are available in four different assembly versions differentiating in
features:
• XMC4700 Relax Lite
• XMC4700 Relax for 5V Shields
Board User Manual
® ™
-M4 based XMC microcontroller from Infineon Technologies AG.
Table 1 shows its specification.
®
Infineon's ARM
in LQFP144 package (order number XMC4700-F144K2048 or XMC4800-
F144K2048)
2048 kB
352 kB
66 x 99 mm (66 x 101 mm with connectors)
• 12 MHz and 32.768 kHz crystal for CPU
• 25 MHz crystal for Ethernet Phy
• 5 V external powering
• Micro-AB USB Connector interface or
• On-Board Debugger USB interface
• Arduino compatible connectors
• All relevant XMC
• All EtherCAT signals available on expansion pads (X1, X2)
• Ethernet interface via RJ45 jac
• microUSB
• microSD-Card slot
• Serial Wire Debug interface (2x5, 50 mil pitch) to XMC
(on board debugger can be overridden by externally connected
debugger)
On-Board J-Link Debug Probe via USB supporting
• Serial Wire Debug (SWD)
• UART-to-USB bridge (virtual COM)
• On-board debug probe, based on XMC4200 microcontroller
• Ethernet Phy
• CAN transceiver
• 32 Mbit Quad-SPI Flash Memory
• 2 user push-buttons, 2 user LEDs
• Reset push-button
®
Cortex -M4 XMC4700 or XMC4800 microcontroller
™ pins available on expansion pads (X1, X2)
3
™
Rev. 1.4
2022-06-20